Yayın: Mechanical response of novel 3D woven flax composites with variation in z yarn binding
Tarih
Kurum Yazarları
Karahan, Mehmet
Yazarlar
Jabbar, Madeha
Nawab, Yasir
Ashraf, Munir
Hussain, Tanveer
Danışman
Dil
Türü
Yayıncı:
Taylor & Francis
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Özet
This paper is focused on the development of novel 3D woven flax composites for improved mechanical performance. The 3D woven interlock fabrics were produced on dobby loom using novel weaving patterns, with variation in binding point density (four different levels). These fabric structures were then used to fabricate composites with green epoxy resin as a matrix. Tensile, flexural, short beam shear, impact (pendulum and drop weight) and compression after impact properties were characterized. It was found that 3D woven composites having higher binding point density showed overall improved mechanical behavior, i.e. the out-of-plane properties were enhanced whereas in-plane properties are either reduced or unaffected.
Açıklama
Kaynak:
Anahtar Kelimeler:
Konusu
Materials science, Carbon, 2D, Flax yarn, Green composites, Mechanical performance, 3D woven reinforcement, Z yarn binding point density, Flax, Linen, Polyepoxides, Weaving, Wool, Yarn, Epoxy resins, 3D woven, 3D woven composites, Binding points, Compression after impact, Green composites, Mechanical behavior, Mechanical performance, Mechanical response, Weaving
Alıntı
Jabbar, M. vd. (2020). "Mechanical response of novel 3D woven flax composites with variation in z yarn binding". Journal of Natural Fibers, 17(6), 890-905.